Scale

1 to 3

Wingspan

106.3 inches

Length

74.8 inches

Weight ca.

33 lbs+

Power

Toni Clark ZG62 geardrive


Moki S180


Moki S250

Price

US$ 1125

Available:

Museum scale instrument panel

Gun set

Ask for pilot

Ask for museum scale flying propellers


Testimonial by John Romeo:  The Wonneberger Sopwith Pup is quite possibility the quickest and most simple WW1 aircraft to build.This is a true one-third scale aircraft and until the builder adds the engine and electronics; Not one single trip to the hobby shop is necessary.  A limited experience builder could frame up this aircraft, workings evenings, in two/three weeks (four weeks if he is slow.)Mark every piece prior to removal from the light ply. (This is key as several pieces are similar and once removed could be accidentally mismatched.) And all the completed parts FIT! Assuming you have one build table: One wing per evening can be completed. The tailfeathers can all be completed in one evening. The fuselage will require three or four evenings to complete.

Mark Gordon:Just finished the JW Pup and it was one of the finest kits I have ever built.The wood quality the precision and ease of assembly make this a special build.

This is a CAD designed and CNC cut kit. Everything comes together via the tab-lock system, making this build progress quicker and more rewarding than the traditional style of design and construction.The kit contains precision-cut parts from selected plywood, poplar and birch which fit together perfectly and allow for a short building time.The hardware packs include everything you will need to complete the model, with the exception of covering material and glue. For transport the tail section can be removed. The whole kit can be completed without any soldering involved. This model turns out very light and is a pure pleasure to both build and fly. A Moki S180 or Moki S250 radial would be a perfect match for this model but it will be delightful to fly on a ZG62 in combination with our reduction gear drive and scale propeller as well.This model is a true scale rendition of the original plane, based on the original plans.This complete kit includes:Complete set of wood parts, landing gear, wheels, fuel tank,aileron, elevator and rudder control linkage, prefabricated and matched brace wires, all CNC milled fittings, cut to size and pre-drilled sheet metal for the front and aluminum cowl, prefabricated cabane- and wings struts,pre-cut servo-trays, construction drawings and full-size plans, instrument panel, building instructions and lots of small hardware parts.




Home
Home Airplanes Engines and Accessories Accessories Pricelists Disclaimer Youtube Videos